Danfoss VLT Flow Drive FC 111 Programming Manual page 132

VLT® Flow Drive FC 111
Programming Guide
Table 240: Option:
[0] Trip
[1] Warning
[2] Disabled
[3] Derate
14-15 Kin. Back-up Trip Recovery Level
Default value: 200.000 ReferenceFeedbackUnit
Conversion index: -3
Enter the kinetic back-up trip recovery level for the application. This recovery level is the minimum speed of the motor at which the
drive is to ramp up the speed.
Table 241: Range:
Min: 0 Max: 60000.000 ReferenceFeedbackUnit
4.11.3 14-2* Reset Functions
Parameters for configuring auto reset handling, special trip handling and control card self-test or initialization.
14-20 Reset Mode
Default value: [0] Manual reset
Conversion index: -
Define whether the drive waits for a manual reset, or resets itself automatically after tripping. In manual reset mode, press [RESET] or
use digital inputs to reset the drive.
In automatic reset mode, the motor can start without a warning.
Table 242: Option:
[0] Manual reset
[1] Automatic reset x 1
[2] Automatic reset x 2
[3] Automatic reset x 3
[4] Automatic reset x 4
[5] Automatic reset x 5
[6] Automatic reset x 6
[7] Automatic reset x 7
[8] Automatic reset x 8
[9] Automatic reset x 9
[10] Automatic reset x 10
132 | Danfoss A/S © 2021.07
Trip the drive.
Issues a warning.
No action.
The drive would derate.
Parameter type: Option
Data type: u_int8
N O T I C E
Select [0] Manual reset to reset the drive via [Reset] or via the digital inputs.
Select [1]-[12] Automatic reset x 1... x20 to perform between 1 and 20 automatic resets after trip-
ping.
Parameter type: Range
Data type: u_int32
Default value: 200.000 ReferenceFeedbackUnit
2-setup: All setups
Change during operation: True
Parameters
2-setup: All setups
Change during operation: True
AU363928304090en-000101 / 130R0982