Danfoss VLT Flow Drive FC 111 Programming Manual page 204

VLT® Flow Drive FC 111
Programming Guide
Table 474: LCP Error List
LCP error Error message
code
Err 84 LCP comm. lost
Err 85 Key disabled
Err 86 LCP copy failed
Err 88 Data not compatible
Err 89 Read only
Err 90 Database busy
Err 91 Parameter invalid
Err 92 Exceeds limits
Err 93 Motor is running
Err 95 Not while running
Err 96 Password rejected
204 | Danfoss A/S © 2021.07
Communication between the LCP and the drive is lost.
The LCP key is disabled. One of the LCP keys has been disabled in parameter group 0-4*
LCP Keypad.
Data copy failure. This error occurs when data is copied from drive to LCP, or from LCP to
drive (parameter 0-50 LCP Copy).
LCP data incompatible. This error occurs when data is being copied from LCP to drive
(parameter 0-50 LCP Copy). The typical reason is that data is moved between drive and LCP
that have major software differences.
Parameter read only. An operation is issued via LCP to write a value to a parameter that is
read-only.
The parameter database of the drive is busy.
The parameter value that is input via the LCP is invalid.
The parameter value that is input via the LCP exceeds limits.
The LCP copy operation cannot be performed when the drive is running.
The parameter cannot be changed while the drive is running.
The password that is input via the LCP is incorrect.
Description
AU363928304090en-000101 / 130R0982
Troubleshooting