Danfoss VLT Flow Drive FC 111 Programming Manual page 160

VLT® Flow Drive FC 111
Programming Guide
[25]
[71]
[73]
[74]
[75]
[120]
[121]
[122]
[123]
[124]
[125]
[126]
[170]
[171]
[172]
[173]
[174]
4.15.2 20-2* Feedback/Setpoint
Parameter group for feedback function and setpoints. Select which setpoint and feedback to use. The setpoint and feedback can be
a fixed pair or selected separately based on logic comparisons.
20-20 Feedback Function
Default value: [3] Minimum
Conversion index: -
Select how the feedback should be calculated. The feedback can be either a single feedback source or a combination of several
feedbacks.
Table 364: Option:
[0]
[1]
[2]
[3]
[4]
20-21 Setpoint 1
Default value: 0 ProcessCtrlUnit
Conversion index: -3
160 | Danfoss A/S © 2021.07
3
m /h
bar
kPa
m Wg
mm Hg
GPM
gal/s
gal/min
gal/h
CFM
3
ft /s
3
ft /min
psi
2
lb/in
in WG
ft WG
in Hg
Parameter type: Option
Data type: u_int8
Sum
Difference
Average
Minimum
Maximum
Parameter type: Range
Data type: int32
2-setup: All setups
Change during operation: True
2-setup: All setups
Change during operation: True
AU363928304090en-000101 / 130R0982
Parameters