Danfoss VLT Flow Drive FC 111 Programming Manual page 60

VLT® Flow Drive FC 111
Programming Guide
The minimum reference is the lowest value obtainable by summing all references.
Table 97: Range:
Min: -4999
3-03 Maximum Reference
Default value: Configuration dependent
Conversion index: -3
The maximum reference is the highest value obtainable by summing all references. The maximum reference unit matches the selec-
tion of configuration in parameter 1-00 Configuration Mode.
Table 98: Range:
Min: -4999.0
4.5.2 3-1* References
P3-03
P3-02
0
Illustration 9: References
3-10 Preset Reference
Default value: 0%
Conversion index: -2
Enter up to 8 different preset references (0–7) in this parameter, using array programming. For selecting dedicated references, select
preset reference bit 0/1/2 [16], [17], or [18] for the corresponding digital inputs in parameter group 5-1* Digital Inputs.
Table 99: Range:
Min: -100%
3-11 Jog Speed [Hz]
Default value: 5 Hz
Conversion index: -1
60 | Danfoss A/S © 2021.07
Max: 4999
Parameter type: Range
Data type: int32
Max: 4999 Default value: Configuration dependent
50 100%
Parameter type: Range
Data type: int16 [8]
Max: +100%
Parameter type: Range
Data type: u_int16
Default value: 0
P3-10
2-setup: All setups
Change during operation: True
Default value: 0%
2-setup: All setups
Change during operation: True
2-setup: All setups
Change during operation: True
AU363928304090en-000101 / 130R0982
Parameters