Danfoss VLT Flow Drive FC 111 Programming Manual page 161

VLT® Flow Drive FC 111
Programming Guide
Setpoint 1 is used in closed loop as the reference to compare the feedback values with. The setpoint can be offset with digital,
analog, or bus references.
Table 365: Range:
Min: -4999.000
4.15.3 20-6* Sensorless
Parameters for sensorless. See also parameter 16-26 Power Filtered [kW], parameter 16-27 Power Filtered [hp], parameter 18-50 Sensor-
less Readout [unit], and parameter 20-00 Feedback 1 Source.
20-60 Sensorless Unit
Default value: [20] l/s
Conversion index: -
Select the unit to be used with parameter 18-50 Sensorless Readout [unit].
Table 366: Option:
[0]
[20]
[23]
[24]
[25]
[71]
[73]
[74]
[75]
[120]
[121]
[122]
[123]
[124]
[125]
[126]
[170]
[171]
[172]
[173]
[174]
Danfoss A/S © 2021.07
Max: 4999.000 ProcessCtrlUnit
Parameter type: Option
Data type: u_int8
Default value: 0 ProcessCtrlUnit
2-setup: All setups
Change during operation: True
None
l/s
3
m /s
3
m /min
3
m /h
bar
kPa
m Wg
mm Hg
GPM
gal/s
gal/min
gal/h
CFM
3
ft /s
3
ft /min
psi
2
lb/in
in WG
ft WG
in Hg
Parameters
AU363928304090en-000101 / 130R0982 | 161