Danfoss VLT Flow Drive FC 111 Programming Manual page 38

VLT® Flow Drive FC 111
Programming Guide
0-37 Display Text 1
Default value: N/A
Conversion index: -
Use this parameter to write an individual text string to be read via serial communication. Device ID can be included. Only used when
running BACnet.
Table 26: Range:
Min: 0
0-38 Display Text 2
Default value: N/A
Conversion index: -
Use this parameter to write an individual text string to be read via serial communication. Only used when running BACnet.
Table 27: Range:
Min: 0
0-39 Display Text 3
Default value: N/A
Conversion index: -
Use this parameter to write an individual text string to be read via serial communication. Only used when running BACnet.
Table 28: Range:
Min: 0
4.2.4 0-4* LCP Keypad
Enable, disable, and password protect individual keys on the LCP.
0-40 [Hand on] Key on LCP
Default value: [1] Enabled
Conversion index: -
Table 29: Option:
[0] Disabled
To avoid unintended start of the drive in hand-on mode, select [0] Disabled.
[1] Enabled [Hand On] is enabled.
0-42 [Auto on] Key on LCP
Default value: [1] Enabled
Conversion index: -
Table 30: Option:
[0] Disabled
[1] Enabled
38 | Danfoss A/S © 2021.07
Parameter type: Range
Data type: VisibleString
Max: 0
Parameter type: Range
Data type: VisibleString
Max: 0
Parameter type: Range
Data type: VisibleString
Max: 0
Parameter type: Option
Data type: u_int8
Parameter type: Option
Data type: u_int8
To avoid unintended start of the drive, select [0] Disabled.
[Auto On] is enabled.
2-setup: 1 setup
Change during operation: True
Default value: N/A
2-setup: 1 setup
Change during operation: True
Default value: N/A
2-setup: 1 setup
Change during operation: True
Default value: N/A
2-setup: All setups
Change during operation: True
2-setup: All setups
Change during operation: True
Parameters
AU363928304090en-000101 / 130R0982