5 Function Settings And Operations - GRAPHTEC FC4500 User Manual

5
CHAPTER
FUNCTION SETTINGS AND OPERATIONS
PRODUCT SUMMARY
5.1 PAUSE Menu Configuration
5.2 Clearing the Buffer
5.3 Raising/Lowering the Tool
5.4 Setting the Communication Conditions
5.5 Setting the Data Format to be Received
5.6 Assigning THICK Mode
5.7 Setting the Overlay Function
5.8 Assigning the Short Line Segment Settings
5.9 Assigning Tool Numbers
5.10 Assigning Perforation Cutting
5.11 Setting the Tool Interval Adjustment Value
5.12 Setting the Distance Adjustment Values
5.13 Sorting
5.14 Rotating the Coordinate Axes
5.15 Setting the Cutting/Plotting Area
5.16 Setting the Mirror Mode
5.17 Scaling the Image Data
5.18 Setting the Initial Cutting Force
5.19 Setting the Offset Force
5.20 Setting the Offset Angle
5.21 Setting the Step Pass
5.22 Setting the Tool-up Height
5.23 Setting the Tool Movement Speed
5.24 Setting the Pen Carriage Movement Speed
5.25 Printing a Conditions List
5.26 Printing the Self-Test Pattern
5.27 Printing a Character Dump List
5.28 Special Functions