Assigning The Short Line Segment Settings - GRAPHTEC FC4500 User Manual

Chapter 5 FUNCTION SETTINGS AND OPERATIONS

5.8 Assigning the Short Line Segment Settings

This function allows you to assign the short line segment settings to COND Nos. 1 to 8. Use this function to
shorten the overall cutting time through short line segment settings that specify a fast cutting speed for long
straight lines and a slower cutting speed for rounded corners and so forth.
(1) Press the [PAUSE] key to select PAUSE mode.
(2) Press the [NEXT] key repeatedly until the following menu is displayed.
FORCE
I/F
TOOL COND AREA OPT
SPEED
(3) Press the [F2] key (TOOL COND) to display the menu shown below.
FORCE
THICK
TOOL No. ADJ.T POS
SPEED
(4) Press the [F1] key (THICK) to display the menu shown below.
FORCE
THICK No. SHORT L.
OVERLAY
SPEED
(5) Press the [F3] key (SHORT L.) to display the menu shown below.
FORCE
COND No.
SHORT L.
SPEED
Blinking cursor
The upper row of the display represents the cutting condition COND Nos. A check mark [ ] is displayed under each
of the COND. Nos. to which the short line segment settings have been assigned.
Use the [ ] or [
segment settings to, and the [
Press the [ENTER] key to confirm your selections.
(6) Press the [PAUSE] key to cancel PAUSE mode.
•
The short line segment settings are disabled when "PEN" or "CP001" has been selected as the cutter blade type.
•
Please see the subsection"Short Line Segment Settings" in Section 3.7, "Setting the Cutting Conditions" for details
on how to make the short line segment settings.
5-10
OFFSET
FUNCTION
QUALITY
OFFSET
CUT LINE
QUALITY
OFFSET
QUALITY
OFFSET
12345678
QUALITY
] key to move the blinking cursor to the COND. No. that you wish to assign the short line
] or [ ] key to display or hide the check mark [ ].