GRAPHTEC FC4500 User Manual page 71

Chapter 4 REGISTRATION MARK SETTINGS AND DETECTION
Input the distance that you wish to move the second cross with respect to the first cross. If the second cross does
not need to be moved, simply press the [ENTER] key.
Press the [F2] or [F4] key to move the blinking cursor to X or Y, and then use the [ ] or [ ] key to change the
numeric value. When the displayed setting is satisfactory, press the [ENTER] key to confirm your selection.
Setting range: -9.9 to +9.9 (mm)
Value for Y-axis correction Cross that was plotted first
Value for X-axis correction
Y
Cross that was cut after the first cross was read
X
(14) Press the [PAUSE] key to cancel PAUSE mode.
4-15