Using The Hold Function - GRAPHTEC FC4500 User Manual

3.12 Using the Hold Function

Press the [STOP/VIEW] key during a cutting or plotting operation to temporarily suspend the cutting or
plotting operation.
When the plotter is paused, an operation selection menu appears. Select whether to continue or quit the
suspended cutting or plotting operation.
(1) Press the [STOP/VIEW] key during a plotting or cutting operation.
FORCE
JOB IS INTERRUPTED
CONTINUE
SPEED
(2) Press the [F2] key (CONTINUE) to continue the suspended cutting or plotting operation.
If the [F4] key (QUIT) is pressed, the BUFFER CLEAR OK? menu shown below appears.
FORCE
CONFIRM DATA FROM
HOST STOPPED.
SPEED
Press the [F2] key to select CLEAR and clear the buffer memory. If you do not wish to clear the buffer memory,
press the [F4] key to select CANCEL and return to the menu displayed in Step 1.
(3) If the [F2] key was pressed to select CLEAR, the display changes as shown below and the buffer memory is
cleared.
FORCE
CLEARING BUFFER!
PLEASE WAIT
SPEED
(4) The plotter returns to Ready status.
OFFSET
QUIT
QUALITY
OFFSET FORCE
BUFFER CLEAR OK?
CLEAR
QUALITY SPEED
OFFSET
QUALITY
Chapter 3 PREPARATIONS FOR CUTTING/PLOTTING
OFFSET
CANCEL
QUALITY
3-29