Table of Contents
Advertisement
Current Group is the current test group name,
for example Frequency Tests.
Current Test displays the test being
measured. Here you can switch to another test
from the given list. However, this action will
terminate the ongoing measurement test.
Threshold Settings button opens a new page
that allows you to set the VF/AC Balance
threshold.
Result displays the pass/fail status and Active
VF/AC Balance value.
Test Status displays the current state of
measurement or an error message.
Note: The selected Standard in Setup/Application
Settings determines the name of the frequency
test - ANSI: VF Balance, ITU: AC Balance.
To select the parameter values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
on a value to open a list box of
options.
4. Press
to confirm the value.
VF/AC Balance Active Threshold
Settings
The Threshold Settings page allows you to set the
Active VF/AC Balance Threshold values for the test.
© 2020 Radiodetection Ltd
6100-Cu Multifunction Copper Tester Operation Manual
VF/AC Balance sets the active balance
threshold.
Type is the threshold limit: either Maximum or
Minimum.
Enabled is a flag to use the existing threshold:
either Yes or No. For example, setting the
threshold Enabled to No will disable pass/fail
threshold.
To set threshold values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
on a value to open a list box of
options or the alphanumeric editor screen and
use the navigation keys to scroll through.
4. Press
to confirm the value.
99
Advertisement
Table of Contents
