Table of Contents
Advertisement
To select the parameter values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
on a value to open a list box of
options.
4. Press
to confirm the value.
Power Influence Threshold Settings
The Threshold Settings page allows you to set the
Threshold Power Influence values for the test.
Type is the threshold limit: either Maximum or
Minimum.
Enabled is a flag to use the current threshold:
either Yes or No.
To set threshold values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
on a value to open a list box of
options or the alphanumeric editor screen and
use the navigation keys to scroll through.
4. Press
to confirm the value.
© 2020 Radiodetection Ltd
6100-Cu Multifunction Copper Tester Operation Manual
Result Details
The Result Details page displays the Power Influence
value and graph, and the pass/fail status. You can
maneuver the graph as follows:
Cursor - press the left/right arrow keys to
decrease/increase the values by moving the
cursor. Press and hold the left/right arrow keys
to accelerate the cursor. Press
cursor and place it in the middle of the current
x-axis limits.
o
Zoom references the middle of the x/y
axis and not the cursor position. Press
the arrow keys as follows:
Right = x-axis zoom in.
Left = x-axis zoom out.
Up = y-axis zoom in.
Down = y-axis zoom out.
o
Pan - use left/right arrow keys to pan the
x-axis and the up/down arrow keys to
pan the y-axis.
o
1:1 resets the x-axis and y-axis limits to
full scale.
11.4 VF Impulse Noise
The VF Impulse Noise test allows you to measure
voice frequency impulse noise on the circuit under test.
Count
The Count function displays and updates results in real
time, for the length of time set in Test Duration or less
to recall the
85
Advertisement
Table of Contents
