Remote Display - SPX RADIODETECTION 6100-Cu Operation Manual

Note: The LCD Backlight consumes battery power;
more brightness results in more power
consumption.
To adjust the display settings:
1. From , select System Settings, and then
Display and Language.
2. Use the up/down arrow keys to select the
setting to change.
3. Press to select.

By using the up/down arrow keys, you can
switch between preset brightness levels in the
Backlight item. Press

To display the time and ActiveSync in the title
bar, enable the item.

Press after your selection to confirm.

Use the up/down arrow keys to navigate
between the available languages, then press
to select. You will be prompted to restart
your unit.

To set which Home page the unit defaults to
when pressing
using: and select from the list.

Touchscreen Calibration. To calibrate the
touchscreen, press/tap/click the button to open
a popup window and select Yes or No. This
screen will automatically display during power
up, if calibration was never conducted and the
data file is not available in memory.

To Enable Screenshots, select Enabled
(default), then the Screenshot file format in
© 2020 Radiodetection Ltd
to confirm.
, highlight Start 6100-Cu
6100-Cu Multifunction Copper Tester Operation Manual
either JPG (default) or GIF, and where you
would like to Save Screenshot to: USB
(default) or FTP.
o
If USB, the image is saved to a directory
called \\6100\Screenshots on the USB
memory device. If the directory does not
exist, create it on the root directory of the
USB memory device.
Note: If you selected USB as the screenshot file
location and no USB is connected to the 6100-
Cu, the following popup message is displayed:
Screenshot not saved, Insert USB and press
"Yes" to save it or press "No" to continue to
Help.
o
If FTP, the image is saved locally to
\\DATA\6100\Copper\UploadResults.
From Result Manager\Upload\Upload
Location, select FTP to enable uploading
screenshot images to the FTP server. If
you select USB as the Upload Location,
the image is uploaded to Removable
Disk\6100\Screenshots.
Note: FTP is available only if you have the FTP Result
Upload option listed in System
Settings\Software Options\Platform Options.

6.4 Remote Display

The Remote Display function allows you to connect the
6100-Cu to your computer remotely, using PC
TightVNC or RealVNC client application, and a
Bluetooth or USB connection.

Enable Remote Display button starts the
Remote Display connection. Once the
connection is setup successfully and the
remote display server starts, the button
changes to Stop Remote Display until the
connection is dropped.

Connect to Device allows you to select a
Bluetooth device that has been paired
successfully or a USB Connection. A
connection icon is displayed in the menu bar if
the setup is successful. If you select None,
then the Enable Remote Display button is
disabled.
13