Led Statuses; Transportation - SPX RADIODETECTION 6100-Cu Operation Manual

17.2 LED Statuses

The left-side power and right-side battery LEDs are used to indicate specific statuses of your unit. If you notice that
one of the LEDs displays a particular status, please see the table below to determine what could be causing it.
Power State Power Source
ON DC
Battery
Fake suspend † DC
Suspend Battery
OFF Battery
† Fake Suspend - When AC/DC is plugged in, the 6100-Cu will simulate the suspend mode by turning off the display
in order to facilitate the charge

17.3 Transportation

Maintain a temperature range within specifications when transporting the unit. Transportation damage can occur
from improper handling. The following steps are recommended to minimize the possibility of damage:

Pack the unit in its original packing material when shipping.

Avoid high humidity or large temperature fluctuations.

Keep the unit out of direct sunlight.

Avoid unnecessary shocks and vibrations.
154
Charger State Battery Level
Error N/A
Charging N/A
Charged Full
N/A < 13 %
≥ 14 % - < 37 %
≥ 38 % - < 62 %
> 63 %
Error N/A
Charging N/A
Charged Full
N/A N/A
N/A N/A
Power LED Battery LED
Solid green Red
Green blinking
Solid green
Solid yellow Red blinking
Yellow blinking
Yellow
Solid Green
Solid green Red
Green blinking
Solid green
Yellow blinking Black
Black Black
© 2020 Radiodetection Ltd