Table of Contents
Advertisement
6100-Cu Multifunction Copper Tester Operation Manual
o
Result File Name allows you to
preview and edit the result file name.
The proposed file name is based on
current auto-naming parameters
configured in Setup/Application
Settings/File Name.
o
Save button confirms if the Result File
Name is saved successfully.
Export Report
o
Report File Storage Location is set to
USB automatically.
o
Report Format is HTML, MHTML, or
XML.
You can generate and export HTML, MHTML,
or XML reports from any saved test result.
Reports include:
General Information including Pass/Fail
status.
Identification
Profile/Result Summary
Blank entries for your Signature and the Date.
Report File Name allows you to preview and
edit the result file name. The proposed file
name is based on current auto-naming
parameters configured in Setup/Application
Settings/File Name.
Export button confirms if the Report File
Name is saved successfully. If a USB device is
not inserted, the following warning dialogue
box appears: USB device not present.
To set parameter values and save results:
1. Press the left/right and up/down arrow keys to
highlight the desired parameter.
2. Press
to display the list or select the value.
3. Press the up/down arrow key to highlight the
desired value.
OR
4. Press the left arrow key to erase the existing
value, and then use the alphanumeric keypad
to enter a value. To cancel the entry, press
.
5. Press
to accept the value.
Select Result File
Select Result File page displays a list of existing file
names where you can save your results.
48
To save your results to an existing File Name:
1. Use the up/down navigation keys to highlight
the desired File Name.
2. Press
to confirm your selection.
© 2020 Radiodetection Ltd
Advertisement
Table of Contents
