Keypad; Using Screenshot Capture - SPX RADIODETECTION 6100-Cu Operation Manual

Multifunction phone network analyser and copper tester
Hide thumbs Also See for RADIODETECTION 6100-Cu:
Table of Contents

Advertisement

5.3 Keypad

Back
Enter
Power
Arrow keys
Power button on the lower left side of the unit is
used to power the unit on and off.
Arrow Keys navigate the screen to access and
modify parameters.
Function Keys activate the corresponding on-
screen function button.
Home button brings you to the Copper Main
page of the 6100-Cu or to the Home page.
5.4 Using Screenshot
Capture
Using the Home/Help button, you can take a
screenshot of the current page display. If screenshots
are Enabled, you will have to select No in the popup
message before accessing the onboard help. (See
below.)
Screenshot Capture
To take a screenshot:
Press and hold the Home/Help button to capture the
current page and save it with filename
screenshot_ddmmyyyy_hhmmss
where ddmmyyyy is 2-digit day, 2-digit month, 4-digit
year; and hhmmss is 2-digit hour, 2-digit minute, and 2-
digit second.
Note: The date and time value format is dependent on
the format selected in System Settings \ Date
and Time.
Screenshots can be Enabled or Disabled from
the System Settings \ Display and Language
page.
© 2020 Radiodetection Ltd
6100-Cu Multifunction Copper Tester Operation Manual
Function
keys
Home/
Note: If you selected USB as the screenshot file
Help
Start/
Stop
test
Onboard Help
Onboard help is available at any time. Most test
operations pause while you view help, but will resume
automatically when you exit help.
To access help about the current function at any
time:
Press and hold the
If Enabled, press and hold the
capture a screenshot on any page.
A popup message is displayed saying
Screenshot captured, Press "Yes" to save
or "No" to continue to Help. Pressing No will
also discard the screenshot.
location and no USB is connected to the 6100-
Cu, the following popup message is displayed:
Screenshot not saved, Insert USB and press
"Yes" to save it or press "No" to continue to
Help.
Disabling Enable Screenshots will take you to
the onboard help page when pressing and
?
holding the
key, as previously described.
?
key.
?
key to
11

Advertisement

Table of Contents
loading

Table of Contents