Table of Contents
Advertisement
6100-Cu Multifunction Copper Tester Operation Manual
Active Result Details
The Active Results Details read-only page displays
the VF/AC Balance value and the pass/fail status.
Passive
The Passive function computes the passive balance as
the difference between Power Influence and VF
Noise, displaying and updating results in real time, until
you stop the test.
The last valid results then remain displayed. The
measurement results of the active and passive VF
Longitudinal Balance tests will generally be different
due to the fact they use different measurement
techniques.
Current Group is the current test group name,
for example Frequency Tests.
Current Test displays the test being
measured. Here you can switch to another test
100
from the given list. However, this action will
terminate the ongoing measurement test.
Noise Filter displays the type of noise filter
used.
Power Line Frequency displays the frequency
value of the power line.
Threshold Settings button opens a new page
that allows you to set the VF/AC Balance
Threshold.
Result displays the Passive pass/fail status,
Power Influence, VF Noise, and VF/AC
Balance values.
Test Status displays the current state of
measurement or an error message.
Note: The selected Standard in Setup/Application
Settings determines the name of the frequency
test - ANSI: VF Balance, ITU: AC Balance.
To select the parameter values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
on a value to open a list box of
options.
4. Press
to confirm the value.
VF/AC Balance Passive Threshold
Settings
The Threshold Settings page allows you to set the
Passive VF/AC Balance Threshold values for the
test.
© 2020 Radiodetection Ltd
Advertisement
Table of Contents
