SPX RADIODETECTION 6100-Cu Operation Manual page 143

Multifunction phone network analyser and copper tester
Hide thumbs Also See for RADIODETECTION 6100-Cu:
Table of Contents

Advertisement

Frequency Result
The Frequency Result page displays results and
pass/fail status for the VF/AC Balance test.
Frequency Result Graphs
The Frequency Result Graphs page displays the
results in text and graphical format for the following
frequency tests:
WB Balance displays pass/fail status, and
mask if the last selected threshold parameter
was set to Mask.
WB Attenuation displays pass/fail status,
mask if the last selected threshold parameter
was set to Mask, and values for:
o
Cable Length
o
Elapsed Time (M:SS)
© 2020 Radiodetection Ltd
6100-Cu Multifunction Copper Tester Operation Manual
Load Coil (Detection) displays the number of
load coils.
Return Loss displays the pass/fail status and
a graph of the Return Loss Sweep compared
to Marginal results. If the measurement is
greater/less than the marginal test threshold,
represented by a horizontal red line, the status
is fail. Otherwise, the status is pass.
To select a test:
1. In the Select Test parameter, press the
left/right arrow keys to view and select the
options.
OR
2. Press
on a value to open a list box of
options and press the up/down arrow keys to
highlight the desired test.
3. Press
to confirm the test.
Select Graph button changes to Graph
Selected when pressed and opens a new
selection of function keys which allow you to
maneuver the graph as follows:
o
Cursor - press the left/right arrow keys
to decrease/increase the values by
moving the cursor. Press and hold the
left/right arrow keys to accelerate the
cursor. Press
place it in the middle of the current x-axis
limits.
o
Zoom references the middle of the x/y
axis and not the cursor position. Press
the arrow keys as follows:
Right = x-axis zoom in.
Left = x-axis zoom out.
Up = y-axis zoom in.
Down = y-axis zoom out.
o
Pan - use left/right arrow keys to pan the
x-axis and the up/down arrow keys to
pan the y-axis.
o
1:1 resets the x-axis and y-axis limits to
full scale.
o
Return To Test removes these function
keys to display the previous function
keys.
to recall the cursor and
143

Advertisement

Table of Contents
loading

Table of Contents