Introduction; About This Manual; Additional Documentation; About The 6100-Cu - SPX RADIODETECTION 6100-Cu Operation Manual

6100-Cu Multifunction Copper Tester Operation Manual

2.1 About this manual

This manual provides copper network installation and
repair professionals with comprehensive operating
instructions for the 6100-Cu test system. Before
operating the 6100-Cu system it is very important that
you read this manual in its entirety, noting all safety
warnings, cautions and procedures.

Additional documentation

The full product specification and related manuals are
available to download from
www.radiodetection.com.

2.2 About the 6100-Cu

The 6100-Cu is a handheld device designed to qualify
and troubleshoot the copper-loop plant by using
pass/fail-driven automated functionalities.
The unit also verifies the location of faults during the
installation and repair of voice and DSL circuits.
For more information, including available accessories,
please visit
www.radiodetection.com

2.3 Product description

The 6100-Cu Test Set is housed in an aluminum
enclosure with rubber over mold, which makes it ideal
for field use. Its display is a back-lit LCD featuring 480 x
800 resolution. A membrane keypad mounted on the
face of the unit features a 14-button keypad used to
operate the test set. An external keyboard and mouse
can also be used.
2.4 Key Features and
Benefits
User-defined automatic testing
Single-ended copper testing – no remote device
required
Color display with graphical analysis
Battery powered
Rugged and weatherproof handheld unit
Touchscreen with stylus
Compatible with Teletech TS125 or Viavi UFED IIB
Remote Far End Device (FED) for remote control
circuit change
6

Introduction

2.5 Typical Applications


Automatic Pair Quality Test toward remote test
head or far end device (FED)

Multimeter tests

Noise tests including power influence and PSD

Frequency tests including balance, load coils,
and tracing tone

Fault location tests including TDR and RFL

SmartR features including Pair Detective and
FaultMapper

Configurable pass/fail results for automated
testing
© 2020 Radiodetection Ltd