Table of Contents
Advertisement
6100-Cu Multifunction Copper Tester Operation Manual
FTP Setup
The FTP Setup function allows you to configure the file
transfer information using the following:
Address Format allows you to select the FTP
server address type:
o
IP Address
o
URL
FTP Server Address allows you to set either
the IP Address or URL.
Port is a fixed numeric value for the signaling
port used to establish an IP network session.
Username/Password is your login ID and
password.
Mode is either Active or Passive for the file
transfer mode.
Transfer Type is set to Binary, transferring
files as a binary stream of data.
Remote Directory can be used to specify the
file upload directory on the FTP server, for
example, dir1/dir2. If this field is left empty, the
FTP upload will save the result file at root
directory on FTP server.
Restore Default button allows you to reset the
entries to their defaults.
To configure the setup options:
1. Press the up/down arrows to select the desired
parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
18
3. Press
on a value to open a list box of
options or the alphanumeric editor screen and
use the navigation keys to scroll through.
4. Press
to confirm the value.
Wi-Fi Setup
The Wi-Fi Setup pages allows you to connect your
6100-Cu to a Wi-Fi network.
Select a Wi-Fi Network for Upload lists the
available secure Wi-Fi networks in range and
presently connected. (Unsecured Wi-Fi
networks are not supported.) The last three
networks that were connected are also listed,
whether or not they are presently connected to
the 6100-Cu.
Note: If you select a network from the list of previously
selected networks (last 3), the 6100-Cu will try to
join that network using the credentials saved for
the selected network.
o
Status displays a Wi-Fi symbol if the
device is connected, and is
dynamically updated with the present
connectivity state of the networks.
o
Network Name is the Wi-Fi network
name.
o
A third, right-hand column displays a
checkmark indicating the network
selected for upload.
Forget Network button removes a previously
joined network from the list.
© 2020 Radiodetection Ltd
Advertisement
Table of Contents
