Table of Contents
Advertisement
6100-Cu Multifunction Copper Tester Operation Manual
Started with the 6100-
Cu
5.1 Turning the Unit On/Off
When you turn the unit on, you may use it immediately
under normal conditions. When the unit is turned off, it
keeps the following parameters in its internal memory:
Setup including application settings, phone and
cable books, and test lead characteristics.
Profiles consisting of:
o
Test parameters
o
User-defined thresholds
Note: Save the current profile before turning the unit
off, or else any changes will be lost. See
save a
profile, use one of the following function
keys: for more information.
Regional, LCD, and energy-saving settings
Test results saved internally vs. USB
There are two ways to turn off the 6100-Cu:
Suspend: the next time you turn your unit on,
you will quickly return to your work
environment.
Shutdown: completely cuts power to the unit;
the unit will perform a complete restart routine
the next time you use it. You should perform a
shutdown if you do not intend to use your unit
for a few hours or more.
To turn the unit on:
Press
to start. The unit initializes for a few seconds
and displays the Home pane.
To enter suspend mode:
Press
for about 2 seconds. The 6100-Cu will stay
in suspend mode for 2 hours. After which it will
automatically shut down. This prevents complete
battery discharge and ensures maximum battery
performance.
To perform a shutdown:
Hold down
for at least 4 seconds. The shutdown
process starts.
10
Getting
Note: In both previous cases, if the power adapter is
connected, the 6100-Cu will simulate either a
fake suspend or fake shutdown in order to
facilitate the charger.
Note: If you hold
6100-Cu may reset the date and time to incorrect
values. Once the unit is powered back on, an
Invalid Date and Time dialogue box will pop up
displaying The unit date and time are probably
invalid. (1/1/2006 12:00:25 PM). Please update
the date and time in Date and Time to ensure
the delivery of all the functionality the unit has to
offer.
5.2 Using Menus and Keypad
You can access various tools from the keypad or menu.
Menu options may differ depending on your unit
To
configuration.
Home menu is where you can access Copper tests or
System Settings. Each test has a sub menu.
To navigate through the items, use the arrow
keys.
To confirm a choice or enter a menu,
press
To cancel an action or test, or return to the
previous item or pane, press
Press
or twice to return to the Home page.
Note: Pressing
the test and return to the main menu screen.
Note: You can also select an option directly by pressing
the function keys corresponding to the on-screen
buttons at the bottom of the screen.
down for 12 seconds or more, the
.
once to return to the Main test menu
while a test is running will also stop
© 2020 Radiodetection Ltd
.
Advertisement
Table of Contents
