Software Options; Information - SPX RADIODETECTION 6100-Cu Operation Manual

6100-Cu Multifunction Copper Tester Operation Manual
To change the power scheme settings:
1. Press , select System Settings, and then
Battery Info.
2. Under DC IN or BATTERY, use the arrow keys
to select Idle/suspend timeout modes. Press
to view the list of available choices or use
the left/right arrow keys.
3. Select a new value, then press
the choice. Repeat for the other modes as
needed.

6.7 Software Options

To activate a newly purchased option key on your
6100-Cu, please contact Radiodetection. The unit may
require returning to Radiodetection.
Copper Options
This screen lists all the Copper Configured Options
that are present on the unit. Possible options are as
follow:

TDR

RFL

FaultMapper

Pair Detective

Wideband Testing

Near End Crosstalk

High Voltage Isolation Resistance

Stressed Balance Test

Far End Device Test Control
16




Platform Options
to confirm
This screen lists all the Platform Configured Options
which are present on the unit.
Possible options are:



6.8 Information

About Radiodetection
The About tab contains contact information should you
require technical assistance.
6100-Cu Information
The Information tab displays information about the
product, software, and memory installed on the device.
The page also identifies hardware information.
To view the complete version numbers of the
software installed on the device:
1. Press the Information tab again.
2. Press the tab again to return to the original
Return Loss
ADSL+ and VDSL2 Data Rate Prediction
VDSL2-35b Data Rate Prediction
UFED Control
FTP Result Upload
Touchscreen Support (always enabled)
value.
© 2020 Radiodetection Ltd