Table of Contents
Advertisement
A maximum of 20 different entries can be added.
To manage the list:
1. Press the left/right arrow keys to select the
Previous/Next Entry buttons and press
select the previous/next entry.
2. Press Page Up/Down function keys to see
entries on the previous or next pages. These
keys are disabled if no other pages exist.
3. Press Add function key to add an entry just
below the selected entry in the list.
4. To edit an entry, press the up/down arrow keys
to highlight the selected test. Press Accept
function key to confirm the changes. If you
press Previous/Next Entry buttons before the
Accept function key, the edited value will be
lost.
5. Press Delete function key to delete any entry
you have added.
File Name
The File Name tab sets up the standard configuration
for automatically naming a result file. You can only
Enable/Disable the entries. All enabled entries are
considered for file name generation.
© 2020 Radiodetection Ltd
6100-Cu Multifunction Copper Tester Operation Manual
File Name Preview displays a preview of the
file name. The actual values of the enabled
entries are not shown.
Date and Time value format depends on the
format selected in System Settings. This entry
cannot be disabled.
Separator allows you to choose a value to
to
separate the enabled entries in the file name,
e.g.: Space ( ), Dash (-), Underscore (_).
Change Order button allows you to change the
order of the file name entries by moving them
up or down in the list.
To select an entry and choose a value:
1. Press the up/down arrow keys to highlight the
desired entry.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
options.
4. Press the up/down arrow keys to select the
option and press
Change Order
Change Order page allows you to change the order of
the File Name Fields in the list.
on a value to open a list box of
to confirm your selection.
41
Advertisement
Table of Contents
