Load Trace; Result Details - SPX RADIODETECTION 6100-Cu Operation Manual

Multifunction phone network analyser and copper tester
Hide thumbs Also See for RADIODETECTION 6100-Cu:
Table of Contents

Advertisement

6100-Cu Multifunction Copper Tester Operation Manual

13.4 Load Trace

The Load Trace function allows you to load a saved
trace. The tab opens a page listing previously saved
TDR tests by File Name and when the test was saved,
that can be used as the trace files to be loaded. A trace
may be loaded:
Prior to starting the TDR test.
During the TDR test, while it is running.
After the TDR test has been stopped.
Traces may be loaded from either 6100-Cu internal
memory or USB.
To load a previously saved trace:
1. Press the left/right arrow keys to highlight the
desired Storage Location.
OR
2. Press
to display the list and select the
value.
3. Press the down arrow key to highlight the list
box and press
4. In the list, press the up/down arrows to select
the File Name.
5. Press
to load the trace.
126
to open the list.

13.5 Result Details

The Results Details page displays the TDR test result
cable parameters and the last viewed Range, cursor,
and marker positions. The distance
between cursor and marker is displayed at the top of
the graph.
Results are shown in text and graphical format in
Portrait/Landscape Mode. You can load a saved auto
TDR trace (secondary trace) and display it
simultaneously with the original TDR trace (primary
trace).
Note: The saved TDR test only displays the live/primary
trace.
Test Identification is the test type of the
group, for example Auto TDR.
Range allows you to set the range from the
given list in Auto TDR only.
Gain displays whether the parameter was set
to Auto or manual.
Pulse Width is a non-editable value that is
updated dependent on whether the parameters
are set to Auto or manual.
Dual Trace Offset % is a configurable offset
parameter for the secondary trace, with a
range of -100 % to +100 %.
Current Trace (not available in Auto TDR)
allows you to turn on/off Live and Peak traces
by selecting one of the following:
o
Live turns Peak Hold OFF clearing
previously collected minimum/maximum
measurement values. This is the default.
Δ
(Delta) value
© 2020 Radiodetection Ltd

Advertisement

Table of Contents
loading

Table of Contents