Table of Contents
Advertisement
6100-Cu Multifunction Copper Tester Operation Manual
To access the Dialer function:
1. On the Home pane use the up/down arrow
keys to highlight Copper Test, then press
2. From the Copper Main or Multimeter (if FED
option enabled) page select Dialer and
press
.
Dialer
Dialer provides the following functions:
The means to call and signal voice switch test
functions, such as drop battery, quiet line, and
more.
It is integrated with POTS Auto Test and other
manual test screens for easy access to the
switch functions during those tests. For
example, when testing for load coils, you can
remove the line battery and use the dialer
function to signal the switch to drop battery,
and then run the load coil test.
It is DTMF and can also be used to control a
DTMF FED (Far End Device) by entering
specific FED DTMF commands.
32
Allows you to use the unit as a telephone (with
the built-in speaker or external headset and the
on-screen phone keypad as a dialer) when
Enter Number is invoked, whether in the test
.
results screens or through the separate
dedicated Dialer application.
The following parameters can be accessed from this
page:
Dialing Status shows the current status of the
dialed number.
Group ID displays the group ID number of the
dialed number if it was selected from the
Phone Book.
Entry ID displays the Entry Name of the dialed
number if it was selected from the Phone
Book.
Enter Number displays the telephone number
entered, or selected from the Recent Dialed
Numbers list or Phone Book.
Recent Dialed Numbers button opens a list of
recently dialed numbers for selection.
Select From Phone Book button allows you to
select a number from the Phone Book.
Function Keys:
o
Dial/Hang Up allows you to dial the
selected or entered number, and hang
up the dialer.
o
Add To Phone Book saves the
entered number to the Phone Book.
o
Mute/Unmute Speaker changes the
speaker status.
o
Volume adjusts the volume level.
© 2020 Radiodetection Ltd
Advertisement
Table of Contents
