Comms Setup - SPX RADIODETECTION 6100-Cu Operation Manual

Details of the selected Network Name include:

Signal (RSSI) strength may list one of the
following levels with the table cell shown in the
corresponding colour:
o
No Signal (< -90/black)
o
Very Low (-90 to -82/red)
o
Low (-81 to -72/red)
o
Good (-71 to -68/orange)
o
Very Good (-67 to -58/yellow)
o
Excellent (> -58/green)

Channel displays the Wi-Fi channel number
and frequency.

Security displays one of the following
encryption and authentication types: NONE,
WEP-OPEN, WEP-SHARED, WPA-TKIP,
WPAPSK-TKIP, WPA2-TKIP, WPA2PSK-TKIP,
WPA-AES, WPAPSK-AES, WPA2-AES,
WPA2PSK-AES.

Network Type is either Access Point (the
infrastructure network or router) or Adhoc
(spontaneous).
To navigate to a Wi-Fi network and view the details:
5. Press to get into the list.
6. Press the up/down arrow keys to select a
network and view its details below.

6.11 Comms Setup

Connection Enable
The Connection Enable tab allows you to choose the
Connection Method for upload.
© 2020 Radiodetection Ltd
6100-Cu Multifunction Copper Tester Operation Manual

Wi-Fi

Ethernet

Disable Connection option disables uploads
via Wi-Fi or the Ethernet.
When Wi-Fi or Ethernet are selected, their respective
icons are displayed in the top right-hand corner of the
navigation bar. The status of whether or not a
connection is present is indicated by the color of the
icon: green, yellow, or red.
Wi-Fi Setup
The Wi-Fi Setup function for Comms Setup is the
same as in the System Settings/Upload Setup.
Please see Wi-Fi Setup on page 18.
Ethernet Setup
The Ethernet Setup function for Comms Setup is the
same as in the System Settings/Upload Setup.
Please see Ethernet Setup on page 19.
21