Table of Contents
Advertisement
Select Other Network button opens a new
page allowing you to search for a specific
network.
Find Networks button searches for available
networks.
Note: Only Wi-Fi channels 1-11 are supported.
To connect your 6100-Cu to a Wi-Fi network:
1. Press the down arrow key to highlight the list
box and press
2. In the list, press the up/down arrows to select
the desired network.
3. Press
to confirm a network and open the
alphanumeric editor screen to enter your
Password.
4. Press
to come out of the list.
5. Press the down and left/right arrow keys to
highlight the network buttons and press
Select Network
The Select Network page allows you to search for a
specific Wi-Fi network.
Network Name opens the alphanumeric editor
screen allowing you to enter the name of the
desired Wi-Fi network.
Security lists the following wireless security
protocols:
o
WEP (Wired Equivalent Privacy)
o
WPA (Wi-Fi Protected Access)
o
WPA2 (Wi-Fi Protected Access version
2)
© 2020 Radiodetection Ltd
to get into the list.
6100-Cu Multifunction Copper Tester Operation Manual
Note: When using WPA encryption, some specific
routers may have performance issues with the
supplied Wi-Fi dongle. In this case, please use
WPA2 encryption.
Password opens the alphanumeric editor
screen allowing you to enter the desired Wi-Fi
network's password. Join function key replaces
Done on the editor screen.
Join function key allows your 6100-Cu to
connect to the other network and it becomes
the selected/preferred upload network.
To configure the other network parameters:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
options or the alphanumeric editor screen and
.
use the navigation keys to scroll through.
4. Press
5. Press the Join function key to connect to the
other Wi-Fi network.
Ethernet Setup
The Ethernet Setup function allows you to configure
the line and access modes, etc for an Ethernet
connection, using the following parameters:
Access Mode options are DHCP, Static, or
PPPoE.
on a value to open a list box of
to confirm the value.
19
Advertisement
Table of Contents
