SPX RADIODETECTION 6100-Cu Operation Manual page 141

To set parameter values and save results:
1. Press the left/right and up/down arrow keys to
highlight the desired parameter.
2. Press to display the list or select the value.
3. Press the up/down arrow key to highlight the
desired value.
OR
4. Press the left arrow key to erase the existing
value, and then use the alphanumeric keypad
to enter a value. To cancel the entry, press
.
5. Press to accept the value.
Multimeter 1 Result
The Multimeter 1 Result page displays the following
results and pass/fail status:

AC-DC Voltage - volts and frequency (Hz)
values for each continuous AC/DC Pair.

AC-DC Current - DC current, AC current and
frequency (Hz) values for each wire Pair.

Resistance for each wire Pair and Length for
T/R/A/B.
© 2020 Radiodetection Ltd
6100-Cu Multifunction Copper Tester Operation Manual
Multimeter 2 Result
The Multimeter 2 Result page displays the following
results and pass/fail status:

Resistive Balance - R/B-Leg, T/A-Leg, Loop
resistance, and pass/fail status and values in Ω
and %.

Isolation - pass/fail status, Resistance and a
Soak Counter(s) for each wire Pair. If your
unit has the HIVOLT (high voltage) software
option configured, it enables Isolation
Resistance testing up to 500 V. Default is
inherited from Multimeter Isolation test.

Capacitance/Opens and Length for each wire
Pair and overall Capacitive Balance.
Noise Result
141