SPX RADIODETECTION 6100-Cu Operation Manual page 46

6100-Cu Multifunction Copper Tester Operation Manual
Noise
The Noise tab allows you to set the FED States for all
noise tests, and lists the default value for NEXT test.
The Terminated FED state appends the required
resistance value. For example, if you select
Terminated (600 Ω) 5, the Termination Resistance
will be 600 ohms.
To select the parameter values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press on a value to open a list box of
options and press the up/down arrow keys to
highlight the desired parameter.
4. Press to confirm the value.
Frequency
The Frequency tab lists the default FED States set for
frequency tests and allows you to set the values for the
following:

VF/AC Balance

WB Balance

Return Loss
46
Default values are displayed for WB Attenuation, RX
Tone with FED, and Load Coils.
The Terminated FED state appends the required
resistance value. For example, if you select
Terminated (600 Ω) 5, the Termination Resistance
will be 600 ohms.
To select the parameter values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press on a value to open a list box of
options and press the up/down arrow keys to
highlight the desired parameter.
4. Press to confirm the value.
Other
The Other tab displays the default FED States set for
all other tests. The FED States are listed for the
following tests:

xTalk TDR

RFL Single/Separate Good Pair/K-Test

Pair Detective
You can set the default values for the following:

Auto/Manual TDR

FaultMapper
© 2020 Radiodetection Ltd