Table of Contents
Advertisement
6100-Cu Multifunction Copper Tester Operation Manual
VOP allows you to change the velocity of
propagation value for the cable.
Cable Setup button opens a new page that
allows you to set the Cable Parameters for the
Current Test.
Note: For more options and control, exit the Pair
Detective test and select TDR from the Copper
Main menu.
Select Graph button changes to Graph
Selected when pressed and opens a new
selection of function keys which allow you to
maneuver the graph as follows:
o
Cursor/Marker allows you to select the
cursor (blue) or marker (red)
independently by toggling the function
key. The footer updates to reflect either
Move cursor or Move marker. Press
the left/right arrow keys to
decrease/increase the values by
moving the cursor/marker. Press and
hold the left/right arrow keys to
accelerate the cursor/marker. Press
to recall the cursor/marker and
place it in the middle of the current x-
axis limits.
o
Zoom references the middle of the x/y
axis and not the cursor position. Press
the arrow keys as follows:
Right = x-axis zoom in.
Left = x-axis zoom out.
Up = y-axis zoom in.
Down = y-axis zoom out.
o
Pan - use left/right arrow keys to pan
the x-axis and the up/down arrow keys
to pan the y-axis.
o
1:1 resets the x-axis and y-axis limits
to full scale.
o
Return To Test removes these
function keys and displays the
Continuous page.
Result displays the distance to the most
significant reflection, in text and graphical
measurements. The distance
between cursor and marker is also displayed at
the top of the graph.
Test Status displays the current state of
measurement or an error message.
76
To select the parameter values in Portrait Mode:
To select the parameter values in Landscape Mode:
Δ
(Delta) value
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view, select
the options, or increase/decrease values.
OR
3. Press
on a value to open a list box of
options or the alphanumeric editor screen and
use the navigation keys to scroll through.
4. Press
to confirm the value.
Landscape Mode is the best way to use the
TDR and allows you to view the test results in
landscape mode utilizing the full length of the
high resolution, color screen. Whether the
keyboard is on the right or left is dependent on
your preferred Landscape Mode Settings
configured in Setup/Application
Settings/General.
Landscape Mode generates the following
function keys:
o
Portrait Mode is used to change the
screen orientation from landscape to
portrait.
o
Select Graph opens a new selection of
function keys which allow you to
maneuver the graph. (Same as above.)
o
Parameters displays a small strip
window listing the following values:
Range and Gain, and Pulse Width.
They can be edited or viewed as
described in Portrait Mode (above).
o
Cable Setup displays a small strip
window when selected allowing you to
change the Cable Type and Cable
Temperature. You can also view the
Cable Gauge and Cable Fill entries
which were setup in Cable Book, and
Velocity of Propagation. For more
information, see
Setup
on page 72.
1. Press the desired function key.
2. For Parameters and Cable Setup, press the
up/down arrow keys to highlight the desired
parameter.
3. Press the left/right arrow keys to view, select
the options, or increase/decrease values.
4. Press
to confirm the value.
Pair Detective Cable
© 2020 Radiodetection Ltd
Advertisement
Table of Contents
