Table of Contents
Advertisement
6100-Cu Multifunction Copper Tester Operation Manual
o
Cable Setup displays a small strip
window when selected allowing you to
view the Cable Type, Cable Fill,
Velocity of Propagation, and Cable
Temperature. For more information, see
Cable Setup in portrait mode.
To select the parameter values in Landscape Mode:
1. Press the desired function key.
2. For Parameters and Cable Setup, press the
up/down arrow keys to highlight the desired
parameter.
3. Press the left/right arrow keys to view, select
the options, or increase/decrease values.
4. Press
to confirm the value.
Cable Setup
The Cable Setup page allows you to view the Cable
Parameters set for the TDR test.
Cable Type displays the ID, Cable Name and
Fill, with its associated parameters from the
current Cable Book.
Cable Gauge identifies the gauge system for
measuring wire sizes, in AWG (American Wire
Gauge) units or mm (metric wire size).
Cable Fill is the type of material the cable is
filled with: Aircore, Jelly, Pulp, 5 PR, or 2 PR.
Setup in the Cable Book.
Velocity of Propagation is the velocity of
propagation for the cable.
Cable Temperature is the temperature of the
cable under test in either °F or °C.
128
Load Trace
The Load Trace function in the Results Details is the
same as previously described. Please see
on page 125 for more information.
13.6 TDR Profile Details
The Profile Details page displays read-only TDR Test
Parameters.
Profile Name is the file name of the selected
saved results.
Test Identification is the test type of the
group, for example TDR.
Load Trace
© 2020 Radiodetection Ltd
Advertisement
Table of Contents
