Table of Contents
Advertisement
6100-Cu Multifunction Copper Tester Operation Manual
15.4 Result Details
The Result Details for User Auto Test display all the
saved results presented during the test.
Please see
Multimeter 1 Result
Multimeter 2 Result
Noise Result
on page 141,
Noise Result Graph
Frequency Result
for more information.
Summary
The Result Details Summary page displays the
overall pass/fail status of all tests selected for auto
testing. This page varies slightly from the run User
Auto Test page in that there are no configurable
parameters.
Test Group is the overall test group of the
selected saved results file, for example Auto
Test.
Test Identification is the test type of the
group, for example User Auto Test.
Cable Setup button opens a new page that
allows you to view the parameters of the cable
used in the Auto Test. Press
page.
146
on page 141,
on page 141,
on page 142, and
on page 143
to open the
Cable Setup
The Cable Setup page displays read-only parameters
of the cable used in the Auto Test.
Cable Type displays the ID, Cable Name and
Fill, (with its associated parameters) from the
current Cable Book, used for testing.
Cable Fill Material is the type of material the
cable is filled with: Aircore, Jelly, Pulp, 5 PR,
or 2 PR.
Velocity of Propagation is the velocity of
propagation for the cable.
Cable Temperature is the temperature of the
cable under test in either °F or °C.
15.5 Profile Details
Profile Details contains the details of the Test
Selection settings for User Auto Test. If FED is
Enabled on FED Setup page, Pause is replaced by
FED States parameters and will show the FED state
for each test.
Test Parameters button opens a new page
displaying read-only parameter details of all
tests.
Test Thresholds button opens new pages
displaying read-only threshold values for all
tests.
© 2020 Radiodetection Ltd
Advertisement
Table of Contents
