Table of Contents
Advertisement
6100-Cu Multifunction Copper Tester Operation Manual
To set threshold values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
on a value to open a list box of
options or the alphanumeric editor screen and
use the navigation keys to scroll through.
4. Press
to confirm the value.
Spectrum Result Details
The Spectrum Results Details read-only page
displays the pass/fail status and test results in graphical
format.
96
Test Group is the overall test group of the
selected saved results file, for example Noise
Tests.
Test Identification is the test type of the
group, for example NEXT.
Test Modes is the mode of test, for example
Spectrum.
Select Graph button opens a new selection of
function keys which allow you to maneuver the
graph as follows:
o
Cursor - press the left/right arrow keys
to decrease/increase the values by
moving the cursor. Press and hold the
left/right arrow keys to accelerate the
cursor. Press
place it in the middle of the current x-axis
limits.
o
Zoom references the middle of the x/y
axis and not the cursor position. Press
the arrow keys as follows:
Right = x-axis zoom in.
Left = x-axis zoom out.
Up = y-axis zoom in.
Down = y-axis zoom out.
o
Pan - use left/right arrow keys to pan the
x-axis and the up/down arrow keys to
pan the y-axis.
o
1:1 resets the x-axis and y-axis limits to
full scale.
o
Return To Test removes these function
keys and returns to the Spectrum
results page.
to recall the cursor and
© 2020 Radiodetection Ltd
Advertisement
Table of Contents
