Table of Contents
Advertisement
selection of function keys which allow you to
maneuver the graph as follows:
o
Cursor - press the left/right arrow keys
to decrease/increase the values by
moving the cursor. Press and hold the
left/right arrow keys to accelerate the
cursor. Press
place it in the middle of the current x-axis
limits.
o
Zoom references the middle of the x/y
axis and not the cursor position. Press
the arrow keys as follows:
Right = x-axis zoom in.
Left = x-axis zoom out.
Up = y-axis zoom in.
Down = y-axis zoom out.
o
Pan - use left/right arrow keys to pan the
x-axis and the up/down arrow keys to
pan the y-axis.
o
1:1 resets the x-axis and y-axis limits to
full scale.
o
Return To Test removes these function
keys and returns to the test results page.
Multiple Tone Table
The Multiple Tone Table displays the RX
Frequency/Loss for the FED Frequency Group
selected.
For VF Receive Tone:
o
POTS/PSTN: 404, 804, 1004, 1204,
1804, 2204, 2404, 2804, 3204, 3404
Hz
© 2020 Radiodetection Ltd
to recall the cursor and
6100-Cu Multifunction Copper Tester Operation Manual
o
VF 5 Tone: 404, 1004, 2804, 3004,
3604 Hz
For WB Receive Tone:
o
HDSL: 20, 30, 50, 70, 90, 110, 130,
196, 400 kHz
o
T1/E1: 200, 400, 500, 700, 772, 1024
kHz
o
ADSL1/2+: 25, 69, 90, 110, 138, 300,
550, 800, 1104, 2208 kHz
o
VDSL2-12: 25, 138, 276, 3000, 3750,
5200, 8500, 12000 kHz
o
WB 5 Tone: 196, 392, 772, 1100, 2200
kHz
Profile Details
The Profile Details page displays read-only Test
Parameters for both the Single and Multiple RX Tone
with FED tests, and may contain the following entries:
Profile Name (only displayed in Results
Manager) is the file name of the selected saved
results.
Test Group is the overall test group of the
selected saved results file, for example
Frequency Tests.
Test Identification is the test type of the
group, for example RX Tone with FED.
117
Advertisement
Table of Contents
