To load a phone book:
1. Select the Storage Location using the
left/right arrow keys.
OR
2. Press
to display the list of options.
3. Using the up/down arrow keys, select a file
name to load.
4. Press Load and confirm. The unit will remove
the existing phone book and replace it with the
loaded one.
OR
5. Press Cancel to remove the message.
Save Phone Book
The Save Phone Book page allows you to save or
export a phone book.
© 2020 Radiodetection Ltd
6100-Cu Multifunction Copper Tester Operation Manual
Save File allows you to enter a file name of the
current phone book to save. By default, the
name is phone_book.csv.
The Storage Location lists the save
destinations:
o
Internal memory
o
USB
Save button saves the selected file.
Note: The unit will overwrite any document with the
same file name found on the disk, without
warning.
To save a phone book:
1. Accept the default file name or press
create a new one using the edit screen.
2. Select a Storage Location.
3. Press Save.
7.5 Dialer Function
The Dialer function provides a dial-up path from the
6100-Cu to another tester (or quiet termination or silent
switchman) through a switched circuit network. DTMF
(dual-tone multi-frequency) transmission is enabled via
the phone keypad allowing you to place POTS calls.
The dialer can be accessed from the Copper Main or
Multimeter (if FED option enabled) pane and is also
integrated into individual test screens to give you quick
access to the manual dialer function, speed dial and
last dialed lists, without exiting the current test
application.
to
31