Table of Contents
Advertisement
Phone Book Parameters:
o
Phone Book Group allows you to select
the Group # from a list of phone book
groups that include mW tone entries.
o
Milliwatt Tone Entry displays at least 1
mW tone entry number from the selected
Phone Book Group.
o
Quiet Line Entry displays the quiet line
entry number from the selected Phone
Book Group.
The dialer will contact the above 2 phone
numbers at specific points of time while the test
is running.
Volume button adjusts the volume level.
Threshold Settings button opens a new page
that allows you to set the POTS Auto Test
threshold parameters.
Mute/Unmute Speaker button changes the
speaker status.
Result displays the number dialed and its
status, measurement values of the multiple test
parameters and their pass/fail status.
Test Status displays the current state of
measurement or an error message.
To select the parameter values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
on a value to open a list box of
options.
4. Press
to confirm the value.
POTS Auto Test Threshold Settings
The Threshold Settings page allows you to set the
POTS Auto Test Threshold Settings for the
combination of multiple tests. The threshold values do
not come from individual tests but are unique to POTS.
© 2020 Radiodetection Ltd
6100-Cu Multifunction Copper Tester Operation Manual
Loop DC Current sets the DC current value
for the wire pair.
Loss sets the loss value for the wire pair.
Power Influence sets the power influence
value for the test.
VF Noise sets the level of voice frequency
noise to be used.
VF/AC Balance (Active) sets the VF/AC
longitudinal balance value for active mode.
Type is a read-only field displaying the
threshold limit: either Minimum or Maximum.
Enabled is a read-only field and always Yes
for all thresholds.
To set threshold values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press
on a value to open the alphanumeric
editor screen and use the navigation keys to
scroll through.
OR
3. Press
to select each value and use the
function keys to complete your selection.
4. Press
to confirm and close your
selections.
137
Advertisement
Table of Contents
