Table of Contents
Advertisement
6100-Cu Multifunction Copper Tester Operation Manual
To view and modify the cable details:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
on a value to open a list box of
options and use the navigation keys to scroll
through.
4. Press
to confirm the value.
5. Press the Accept function key to update the
cable details with your changes.
Add Cable
The Add Cable page allows you to add a new cable
entry into the CableBookSettings using the following
parameters for the currently highlighted Cable ID.
Cable ID displays the cable ID number. This
parameter that cannot be modified.
Cable Name is the name of the cable in the
Cable Book.
Cable Gauge is the gauge system for
measuring wire sizes in AWG (American Wire
Gauge0 units or mm (metric wire size).
Cable Fill allows you to select the type of
material the cable can be filled with: Aircore,
Jelly, Pulp 5, PR, or 2 PR.
Capacitance T-R/A-B allows you to specify a
value for the capacitance per length constant.
36
Capacitance T/R to GND/A/B to E allows you
to specify a value for the capacitance per
length to ground constant.
Resistance allows you specify a value for the
resistance constant of the cable.
Attenuation @ 300 kHz allows you to specify
a value for the reduction in signal strength or
insertion loss of the cable.
VOP allows you to set the velocity of
propagation for the cable.
Temperature specifies the temperature of
reference at which all cable parameters have
been measured.
Add function key adds the new cable entry to
the Cable Book.
To add a new cable entry:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
on a value to open a list box of
options or the alphanumeric editor screen and
use the navigation keys to scroll through.
4. Press
to confirm the value.
5. Press the Add function key to append the new
cable entry to the end of the
CableBookSettings. If the maximum number
of Cable Book entries has been reached,
delete an entry before adding a new one.
Clone Cable
The Clone Cable page allows you to copy the cable
details of an existing entry from the selected Cable
Book to a new cable entry in the CableBookSettings.
The page lists all entries by ID, Cable Name, and
Cable Fill.
Cable # in Use displays the ID number of the
cable in use.
Cable Book Version displays the current
edition number of the Cable Book in use.
© 2020 Radiodetection Ltd
Advertisement
Table of Contents
