Table of Contents
Advertisement
TDR Cable Setup
The Cable Setup page is the same as previously
described. Please see
Pair Detective Cable Setup
on page 72 for more information.
10.2 Pair Detective Result
Details
Summary
The read-only Summary page displays the cable
parameters and detailed results saved from running the
Pair Detective test.
Test Identification is the test type of the
group, for example Pair Detective.
Cable Type displays the ID, Cable Name and
Fill, (with its associated parameters) from the
current Cable Book, used for testing.
© 2020 Radiodetection Ltd
6100-Cu Multifunction Copper Tester Operation Manual
Cable Fill is the type of material the cable is
filled with: Aircore, Jelly, Pulp, 5 PR, or 2 PR.
Velocity of Propagation is the velocity of
propagation for the cable.
Cable Temperature is the temperature of the
cable under test in either °F or °C.
Result displays a Summary of the overall
pass/fail status, DC-Voltage/Current and
Isolation for each selected wire pair, as well as
other detailed results of the Pair Detective
test.
o
Isolation results also display a five-
level indicator of the measured
resistance, when it is below the Hard
Short resistance threshold (on the
Thresholds Settings page).
o
Estimated Length displays the length
of the circuit as found from the TDR
test for the first cycle of the Pair
Detective test.
Multimeter
The read-only Multimeter page displays detailed
results saved from running the Pair Detective test.
Please refer to
Multimeter
information.
10.3 FaultMapper
The FaultMapper is a graphical snapshot of the pair to
locate and identify line faults. It combines and analyzes
the results of several different tests including
capacitance, resistance, TDR, and RFL, to draw a
diagram of the pair depicting common faults.
on page 74 for more
77
Advertisement
Table of Contents
