Section 2. Ac Input Power - Xantrex XDC Series Operating Manual

TM-XDSL-01XN.book Page 15 Tuesday, November 5, 2002 3:22 PM

Section 2. AC Input Power

Release 1.0
WARNING
Disconnect AC power from the unit before removing the connector cover. Live line
voltages may be exposed when the cover is removed.
WARNING
A safety ground wire must be connected to the unit as shown in Figure 2.1 to ensure
operator safety.
CAUTION
!
When the power switch is turned on, output voltage or current previously set may be
applied to loads, depending on the supply configuration.
AC Input Power
Front Panel
15