Profinet Io Fieldbus Couplers 750-370, 750-375(/025-000), 750-377(/025-000); 4Ai 0/4-20 Ma Ex I (Namur) Parameterization; Figure 45: Example Of A Parameter Assignment Dialog For Profibus Dp; Table 54: 750-370 Configuration - WAGO 750-486 Manual

92 Appendix
10.2.1.2 PROFINET IO Fieldbus Couplers
750-370, 750-375(/025-000), 750-377(/025-000)
When using the aforementioned PROFINET IO fieldbus couplers, the process
image size is configured by selecting the corresponding GSD entry.

Table 54: 750-370 Configuration

GSD Entry
Module
750-486 4AI, 0/4-20mA
750-486 4AI, 0/4-20mA, EM

Table 55: 750-375(/025-000), 750-377(/025-000) Configuration

GSD Entry
Module
750-486 4AI,
0/4-20mA
10.2.2

4AI 0/4-20 mA Ex i (NAMUR) Parameterization

Apart from the user limits, the GSD file can be used to provide the I/O module on
the PROFIBUS DP and PROFINET IO fieldbus coupler with all operating
parameters.
Figure 45: Example of a Parameter Assignment Dialog for PROFIBUS DP Fieldbus Couplers
Manual
Version 1.1.2
Sub-
Module
n/a
Sub-Module
INT16[4] I
{UINT8, INT16}[4] I/O
WAGO-I/O-SYSTEM 750
750-486 4AI 0/4-20 mA, Ex i
PI-Length/[Byte] Data Type
I O
16 n/a
24 24 {UINT8, INT16}
PI-Length/[Byte] Data Type
I O
16 n/a
24 24 {UINT8, INT16}
Inst.
INT16
4
Inst.
INT16
4