Parameterizing; General Settings; Figure 21: General Settings; Table 25: General Settings - WAGO -TO-PASS 761 Manual

48

Parameterizing

7 Parameterizing
7.1

General Settings

Select the menu item File
connection, interface or language for the TO-PASS

Figure 21: General settings

Table 25: General settings

Connection
RS-232 / GSM /
Analog / ISDN
Modem init.
Area code
761-316 TO-PASS® Mobile, 4 AI, Web, MODBUS
Settings for making general settings, such as type of
>
Select the type of connection for communicating with the
®
TO-PASS telecontrol module:
RS-232
GSM Dial-up using GSM modem on the PC
Analog Dial-up using analog modem on the PC
ISDN Dial-up using ISDN modem on the PC
If the connection is to be established via a modem and this
modem requires initialization, enter the initialization string in
this field.
If this connection is to be established via a modem at an
analog or ISDN PBX and a trunk code is required for this,
enter the trunk code in this field.
WAGO-TO-PASS® 761
®
operating interface.
Direct connection via RS-232 cable
Manual
Version 2.0.0