NEC Renesas V850/SC1 User Manual page 265

After reset: 00H R/W
7
TOCn 0
(n = 0, 1, 7 to 12)
OSPTn
0
1
OSPEn
0
1
TOCn4
0
1
LVSn
0
0
1
1
TOCn1
0
1
TOEn
0
1
Note The one-shot pulse output operates only in the free-running mode and in the clear & start mode entered
upon the TIn0 valid edge.
Cautions 1. Before setting TOCn, be sure to stop the timer operation.
2. LVSn and LVRn are 0 when read after data has been set to them.
3. OSPTn is 0 when read because it is automatically cleared after data has been set.
4. Do not set OSPTn (1) for other than one-shot pulse output.
CHAPTER 8 TIMER/COUNTER FUNCTION
Address: TOC0: FFFFF20CH
TOC8: FFFFF39CH
TOC11: FFFFF0ECH TOC12: FFFFF0FCH
<6> <5> 4
OSPTn OSPEn TOCn4
Controls output trigger of one-shot pulse by software
No one-shot pulse trigger
Uses one-shot pulse trigger
Controls one-shot pulse output operation
Successive pulse output
490
One-shot pulse output
Controls timer output F/F on match between CRn1 and TMn
Disables reverse timer output F/F
Enables reverse timer output F/F
LVRn Sets status of timer output F/F of timer n
0 Not affected
1 Resets timer output F/F (0)
0 Sets timer output F/F (1)
1 Setting prohibited
Controls timer output F/F on match between CRn0 and TMn or valid edge of TIn0
Disables reverse timer output F/F
Enables reverse timer output F/F
Controls output of timer n
Disables output (output is fixed to 0 level)
Enables output
User's Manual U15109EJ3V0UD
TOC1: FFFFF21CH
TOC9: FFFFF3BCH
<3> <2> 1
LVSn LVRn TOCn1
TOC7: FFFFF3ACH
TOC10: FFFFF0DCH
<0>
TOEn
263