Assume Based On The Status - Omron KE1 User Manual

Troubleshooting
4.3

Assume based on the status

By reading the status through communication, you can confirm the condition of unit.
The status is made up of 32 bits: bit 1 indicating the occurrence and bit 0 indicating non-occurrence
(mode of operation 1: stop; 0: operation). (For the status of each model, refer to "Model KM1/KE1
Communication Manual" (SGTE-719).)
Status name
RAM error Indicates a RAM error.
EEPROM error Indicates an EEPROM error.
RTC error Indicates an RTC error.
Communication error Indicates a communication error.
Operation Modes Indicates the operation condition.
Voltage input over Indicates that the measurement voltage is larger than
the standard.
Current input over Indicates that the measurement current is larger than
the standard.
Insufficient input voltage Indicates that the measurement voltage is smaller than
the standard.
Frequency input error Indicates that the measurement frequency is out of the
range of standard.
CT input  Indicates that CT has an input.
ZCT input  Indicates that ZCT has an input.
OUT Indicates that there is an output from OUT.
Alarm 1 Indicates that one of the items set in the measuring
block 1 item setting reaches the condition of alarm
output.
Alarm 2 Indicates that one of the items set in the measuring
block 2 item setting reaches the condition of alarm
output.
4-4
Meaning Measures
If the condition is not changed even by
turning the power OFF, repair is
required. Contact the supplier you
purchased the product from or our sales
representative.
Set the clock again.
If the condition is not changed even by
rechecking communication settings and
wiring, repair is required. Contact the
supplier you purchased the product from
or our sales representative.
-
Return it to within the range of standard.
-
-
-
-
-