Configure Partitions; Panic Response - Abus SECVEST Installer Manual

Configure partitions

Panic response:

Name/function
Name
Panic response:
Explanation
Unique name of the partition
Select here the type of signalling used for a hold up alarm in the selected partition:
Audible
• When a hold up alarm is triggered, communication is sent and the acoustic alarm
is sounded via the applicable sounders and the connected sirens (according to
the set siren time).
• A triangle warning appears on the alarm panel display to indicate the hold up
alarm.
• Details are displayed after a user code is entered.
• The acoustic alarm is muted after a user code is entered.
Silent
• The hold up alarm is only signalled using communication messages.
• There is no audible acoustic alarm.
• "Siren" and "Hold Up" outputs are not activated.
• The hold up alarm is not shown on the alarm panel display.
• The display only indicates the hold up alarm when a user operates the alarm
panel.
Configuration
141