Confirmation - Abus SECVEST Installer Manual

Confirmation

Name/function
Conf. Mode
Explanation (checkbox)
Note
Also follow the detailed information provided for the siren delay. This can be found
under Siren Delay Partitions All Set.
Note
Confirmation mode functions only when alarm reaction is set to "Sirens and ESCC
reporting" (see configuring partitions).
Dropdown selection field for:
• Basic
o
When you select this option, the alarm panel activates an output
that is configured as a "confirmed alarm" when a second zone is ac-
tivated while the system is in alarm status. The second zone must
belong to the partition in which the alarm has occurred. The installer
can also choose whether the user can reset the system after a zone
alarm.
For the "basic" confirmation mode, the administrator can activate or
o
deactivate the intrusion functions for all remote controls via "User
menu - configuration - remote controls - intrusion functions".
Configuration
159