Configuration; Notes - Abus SECVEST Installer Manual

Configuration

Notes

Please consult the user guide for details on activating
and deactivating the system, and on the behaviour of
the alarm control panel and the display (user inter-
face).
The wireless alarm panel is configured in installer
mode.
There are two ways to configure the wireless alarm
panel:
•
directly on the wireless alarm panel using the key-
pad
•
via a web browser on the integrated web server.
The following mainly describes how to configure the
wireless alarm panel via the integrated web server.
The integrated web server can be used to define set-
tings for the wireless alarm system easily using an in-
ternet browser.
S/W < 2.00.00
(Wireless) components are set up/taught in di-
rectly on the wireless alarm panel.
S/W >= 2.00.00
(Wireless) components can be set up/taught in
directly on the wireless alarm panel or via the
web server.
Please also see the "Standard values/factory defaults"
in the appendix.
This section provides reference information about the
options that are available in Installer Mode.
Configuration
45