Acoustic Signal Tones - Abus SECVEST Installer Manual

Appendix

Acoustic signal tones

The alarm panel is able to generate a wide range of acoustic signal tones. On components such as the control panel,
indoor siren/info module, indoor sounder and loudspeaker on the hybrid module, these are similar to the alarm tones,
info tones and operating sounds of the wireless alarm panel.
The following table shows an overview of the signal tones and their group assignment.
Signal tones
Alarm tones:
Info tones:
Operator
Sounds
326
Meaning
Breaking and entering/intrusion
Fire
Medical alarm
Emergency call
Chime
Exit tone
E.g.:
Long continuous beep (beeeeeeeeeeeep):
During the exit delay time. All zones closed, the alarm panel is activated after the
delay time has expired.
Exit tone in the event of a fault
E.g.:
Interrupted beeps (beep...beep...beep):
A zone was opened during the exit delay time. It must be closed before the delay
time expires.
Entry tone
E.g.:
Interrupted beeps (beep...beep...beep):
During the entry delay time.
Emergency call warning, inactivity warning
Acknowledgement/confirmation
E.g.:
Double deep (beep, beep):
The alarm panel has been successfully activated.
Error
E.g.:
Short beep (beep):
System fault, the alarm panel cannot be activated