Abus SECVEST Installer Manual page 221

Call Acknowledge
Messages
Note
means classic voice transmission (also DTMF and FSK) via a wire-
less mobile network.
Note
The display varies according to the setting via IP gateway the "IP Mobile Setup"
menu
Enabled
The alarm transmission must be confirmed by the recipient with "5" or "9"
Pressing DTMF button "5":
calls to this number are ended. Otherwise the calls are repeated and additional
numbers are called.
Pressing the DTMF button "9":
the calling sequence on the alarm panel is terminated.
Note
For VoIP, RFC 2833 DTMF Detectionmust also be activated.
Deactivated
If the function is deactivated, the call is treated like a transmission when the called
line is answered.
Select this item directly in the alarm panel and follow the instructions in the display.
Home Message (approx. 12 sec.)
This message is displayed with every voice transmission. Here you should record
the data for the location of the wireless alarm panel (name, street, building number,
etc.)
Message 1-4 (each approx. 8 sec.)
Recording the messages for the various events. There are four messages available.
For example, record "fire alarm", "intruder alarm", ...
Note
At least one location message and one event message must be recorded. Do not
forget to save the messages after recording.
Note
Note the settings during the test call:
Configuration
221