Configuring Wired Outputs - Abus SECVEST Installer Manual

Configuration
Name/function
Number
Name
Type
Status
Attributes

Configuring wired outputs

Note
Secvest has up to four wired outputs.
Editing outputs
1. Click in the line of the desired output.
Note
It is useful to assign unique output names so that
if a fault occurs it is easier to identify the affected
output.
2. Delete the preset name.
3. Assign a unique name for the output with max. 12
characters.
4. Confirm the selection once the configuration is com-
plete by selecting Submit.
114
Explanation
The number comprises the component type (wired output) and a consecutive num-
ber.
Unique name of the wired output
Type of the wired output
Current status of the wired output
Attributes of the wired output
Inverting outputs (polarity)
Note
You can choose here whether the function of the
output in question is inverted or not. Select Nor-
mal or Inverted.
Selecting the output type
Note
An overview of the different output types can be
found in the "Wireless outputs" section.
1. Select menu item Type.