Configure Partitions; Complete Arming - Abus SECVEST Installer Manual

Configuration

Configure partitions

Please consult the user manual for details on activating and deactivating the system, and on the behaviour of the
alarm control panel and the display (user interface).
workshop, office, etc. (max. 12 characters)!

Complete arming

Name/function
Name
Complete arming
Exit Mode
72
Choose a unique name for each partition, e.g. apartment,
Explanation
Unique name of the partition.
The partition can be assigned an individual name here, e.g. apartment, workshop,
office. Max. 12 characters are allowed.
The alarm panel displays this name during arming.
Settings for the complete arming of the partition
Select the mode of arming when exiting the premises.
Note:
Also see chapter 8 of the user manual "Arming and disarming the system"
Timed Set
 Use this option to arm the partition only after a set delay time. Under "Exit time"
select the corresponding time. The alarm panel logs the start of this timed arming.
 This option does not comply with BS8243:2010.